ACTpro 200(Door Station - 2 doors with PSU) | Burgolarm Integrated Security Technologies

ACTpro-200-Door-Station-2-doors-with-PSU.jpg

Title

ACTpro 200(Door Station - 2 doors with PSU)

Top Divider

The ACTpro 200 is a two door expander for the ACTpro door controllers, complete with built-in, monitored 3 Amp power supply. The power supply supports two doors, each with its own fuse and battery support. On-board LEDs are provided for fault indication and faults are reported to the controller and PC. An 18swg mild steel cabinet provides ample room for wiring and batteries, and the lid will accommodate two ACTpro 101 door stations.

Divider

Features

Two door station/expander. Controls 2 doors. Built-in 3 amp monitored PSU. Battery deep-discharge protection. Fuse blown LED indication. 18 swg mild steel cabinet. Main fault indication. Supports 2 x 7AHr batteries. Accommodates 2 x ACTpro 101 PCB door stations. Mounting points for ACTpro 101 PCB door stations on lid. Supports entry/exit readers. 2 X 1.25 Amp Volts regulated power supply outputs. Alarms are monitored via ACTpro door controller & ACTenterprise software. Each door has a 5amp, 30 volt DC lock relay and a 1amp, 24 volt DC alarm relay

Brochure:

ACTpro_2000_Data_Sheet.pdf

AEB8 Narrow White Plastic Exit Button Switch with Surface Box

• Complete with white surface back box • Current @30v AC/DC - 4 amps • Contacts - double pole NO/NC • Internal Use Only • Dimensions

AEB1NR White Plastic Exit Button Switch with Surface Box

• Complete with white surface back box • Current @30v AC/DC - 4 amps • Contacts - double pole NO/NC • Internal use only • Dimensions 85 x 85 x 41mm

AEB2 Flush Vandal Resistant Exit Button

• Single gang exit switch • Flush vandal resistant • Screen printed 'PRESS TO EXIT' • Normally open / Normally closed contacts • Use SR08411 to surface mount

AMS-EBIR3-RG Infrared Exit Device

• No-touch infrared exit device • Stainless steel plate • 12 - 20V DC • Illuminated status ring • Adjustable range and hold time • Common/Normally Closed/

AEB26-Securefast Stainless Steel Press To Exit Button

• Press To Exit Button • Supplied With Green Backbox Ideal For Surface Mounting • 'Press To Exit' Text • Stainless Steel • NO / NC Closed Contacts • IP66 Rated

MAXHUNT-GREEN BREAK GLASS UNIT-MN6-MX54SGS

Single pole green break glass unit with plastic panel

CQR FP2-GR-EDR

Surface Call Point Green Emergency Door Release. Fully key resettable red manual fire call point which offers almost all commonly used switch monitoring

Green Resettable Call Point - AKA-MCP4A-GF

• Green Plastic Call Point • Double Pole Changeover Contact • Fully Re-settable • Suitable for internal use only • Suitable for surface or flush mounting

AKA-WCP3AG-SG

DEEDLOCK AEM10002 Mini Monitored Magnet

The Deedlock slimline electromagnetic lock is a comprehensive system of low profile magnets suitable for a wide range of applications: • Simple and quick

DEEDLOCK AEM10004 Double Monitored Mini Magnet

The Deedlock slimline electromagnetic lock is a comprehensive system of low profile magnets suitable for a wide range of applications. • Simple and quick

Deedlock Bracket AEMBR089

• Securefast AEMBR089 Z&L Bracket Set for Slimline Magnet to suit Inward opening door. • Deedlock Brackets for Slimline Magnets. • Various accessories

Glass Fixing Armature Plate Bracket AEMBR185

• Architectural brackets are aesthetically pleasing, ideal for buildings requiring modern and attractive appearance • Finish matches the electro magnet

Surface Armature Plate Housing AEMBR018

• Architectural brackets are aesthetically pleasing, ideal for buildings requiring modern and attractive appearance • Finish matches the electro magnet

DEEDLOCK AEM10020 Single Monitored Magnet

• Simple and quick installation • Suitable for a single door • Holding force up to 1200lbs per door • Single monitored magnet version • Dual voltage • Satin

Avocet AEMGATE F S External Gate Maglock

• Suitable for external single vehicle or large pedestrian gates • Surface mounted and simple to install • Holding force up to 1200lbs (dependent on

Avocet AEMBR046 Z Bracket for GATE F S External Gate Maglock

• Suitable for AEM/GATE or AEMGATE/F/S gate locks

DEEDLOCK AEM/SHEAR-30 MORTICE SHEAR MAGNET

• Dual 12V / 24V DC mortice shear magnet (monitored) 30mm wide • 2700lbs (1225kg) max. holding force • Suitable for both single and double doors • Fully

ACTpro Input-Output Module

This is an 8 Input and 8 Output device that allows an ACT controller to be used in applications where signalling to other equipment is required. Examples of

ACTpro eLock Hub

An ACTpro eLock hub is the controller for use with ACTpro eLocks.

ACTpro 4200 (Controller - 4 door with PSU)

4 door controller with a built in PSU, expandable to 16 doors via ACTpro door stations, built in TCP/IP, networkable to 4,000 doors, 60,000 users and 1,000

ACTpro 100e (Door Station - 1 door)

The ACTpro 100e door station facilitates the expansion of an additional door on theACTpro 1500, ACTpro 2000, ACTpro 4000 and

ACTpro USB reader

The ACTpro USB multi-format reader works with MIFARE Classic, MIFARE DESFire EV1 and ACT RFID technologies. There is a built-in audio prompt when a card is

ACTpro 1500 (Controller - 1 door)

The ACTpro 1500 is a single door IP controller expandable up to 32 doors via ACTpro door stations and supports 15,000 users . It can be set-up and administered

ACTpro 200(Door Station - 2 doors with PSU)

The ACTpro 200 is a two door expander for the ACTpro door controllers, complete with built-in, monitored 3 Amp power supply. The power supply supports two

ACTpro eLock 125kHx

Wireless lock for use with ACTpro eLock Hub and ACT enterprise

Flash Mount Plate

Stainless steel/brass front plate for the ACT panel mount readers

ACTpro 1520 (Controller - 1 door with PSU)

The ACTpro 1520 is a single door IP controller expandable up to 32 doors via ACTpro door stations. It has a built-in 12 Volt DC power supply unit. The ACTpro

ACTpro eLock 125kHz with Key-Override

Wireless lock for use with ACTpro eLock Hub and ACT enterprise with External Key-Override

ACTpro 101 (Door station - 1 door)

The ACTpro 101 single door station fits neatly into the ACTpro 200 metal casing or other suitable PSU's. Designed with the installer in mind the ACTpro 101

ACTpro 1030 Vandal Resistant Cover

Vandal resistant cover for use with the ACTpro 1030 mullion reader

ACTpro 120 (Door Station - 1 door with PSU)

The ACTpro 4000 is a two door controller that can extend to a total of 16 doors viaACTpro door stations. In turn up to 250 ACTpro 4000s may be networked via a

ACTpro 4000 (Controller - 2 door)

The ACTpro 4000 is a two door controller that can extend to a total of 16 doors viaACTpro door stations. In turn up to 250 ACTpro 4000s may be networked via a

ACTpro MIFARE 1030PM (Proximity)

The ACTpro MIFARE 1030PM reader is a panel mount proximity reader for use with the ACTpro range. It can be mounted on a single gang electrical back box using

ACTpro eLock MIFARE Classic/DESFire EV1 with External Key-Override

Wireless lock for use with ACTpro eLock Hub with ACTenterprise with External Key-Override.

ACTpro eLock 125kHz with internal and external Key-Override

Wireless lock for use with ACTpro eLock Hub and ACTenterprise with both Interal and External Key-Override

ACTpro eLock MIFARE Classic/DESFire EV1 with External Key-Override

Wireless lock for use with ACTpro eLock Hub and ACTenterprise with External and Internal Key-Override

ACTenterprise Acces Control Software

ACTenterprise has been developed as a role based platform with different modules depending on the user type. The functionality available to each user is

ACTenterprise Lite

ACTenterprise has been developed as a role based platform with different modules depending on the user type. The functionality available to each user is

ACT 5 Leaded Digital Keypad

The ACT 5 leaded digital keypad is a simple to use and easy to install standalone access control product. Keypad backlighting enhances functionality at night

ACT 10 Flush Kit

The ACT 10 flush kit is a stainless steel flush mount plate for use with the ACT 10 digital keypad. The ACT 10 digital jeypad is used to facilitate access

ACT 10 Weather Shield

Stainless steel weather plate for the ACT 10 digital keypad.

ACT 5e - Digital Keypad

The Digital Kyepad ACT 5e is a simple to use and easy to install standalone access control product. Keypad backlighting enhances functionality at night or in

ACT 5e PROX - Digital Keypad with Proximity

The ACT 5e prox digital jeypad plus proximity is a simple to use and easy to install standalone access control product that supports the ACT RFID cards &

ACT 10-Digital Keypad

The ACT 10 digital keypad is a sturdy and durable unit made from vandal resistant die cast zinc with backlit stianless steel keys. It facilitates access

ACTsmart 2 1070 (Proximity)

The ACTsmart2 1070PM is a combined reader / controller. It can be standalone (one door), connected together in a master-slave configuration (up to 8 doors) or

ACTsmart 2 Lock

The use of the ACT Smartlock with the ACTsmart2 reader/controller will enhance the physical security by placing the lock relay in a more secure location, such

ACTsmart2 Controller

The ACTsmart2 controller connects ACTsmart reader/controllers to a PC running the ACTsmart2 software. The ACTsmart2 access control solution supports up to 16

ACT 433RX Long Range Receiver

The ACT 433RX Receiver integrates Gate Entry or Barrier Control within a new or existing access control system. It connects to any 37-Bit Wiegand and Clock

ACTsmart2 Software

ACTWin Smart is a simple, easy to use, windows based PC application that allows configuration and monitoring of up to 16 ACTsmart2 readers/controllers and is

ACTsmart2 1070PM (Proximity)

The ACTsmart2 1070PM is a combined reader/controller. It can be standalone (one door), connected together in a master-slave configuration(up to 8 doors) or

Flush Mount Plate

Stainless steel/brass front plate for the ACT panel mount readers.

ACTsmart2 1080 (Pin & Proximity)

The ACTsmart2 1080 is a combined reader/controller. It can be standalone (one door), connected together in a master-slave configuration (up to 8 doors) or

ACTsmart2 1090 (Pin only)

The ACTsmart2 1090 is a combined pin only reader/controller. It can be standalone (one door), connected together in a master-slave configuration (up to 8 doors

ACTviquest+

ACTViquest is an integrated solution for controlling your access control and video management using one advanced hardware and software solution. Available as

ACTviquest

The ACTviquest is capable of recording up to 8 channels, and managing your complete access control solution up to 100 doors. It comes in a compact desktop form

ACT Magnetic Swipe Card

Swipe card for use with ACTpro 1010

ACT 433TX Long Range Transmitter

In conjunction with any access control system the ACT 433 unit can be used to operate gates from the comfort of your car. With the added advantage of a 2

ACTpro USB reader

The ACTpro USB multi-format reader works with MIFARE Classic, MIFARE DESFire EV1 and ACT RFID technologies. There is a built-in audio prompt when a card is

ACTProx HS Card

ACTpro MIFARE Card

MIFARE 1K ISO contactless smart card, fully printable for photo ID

ACT Lanyard

To secure card holder around the holders neck

ACTProx ISO Card

ACT ISO proximity card, suitable for printing

ACT 433TXprox Long Range Transmitter with Proximity

In conjunction with any access control system the ACT 433 unit can be used to operate gates from the comfort of your car. With the added advantage of a 2

ACTpro DESFire EV1

ACTpro DESFire EV1 card

ACTpro MIFARE Fob

ACT Card Holder

Plastic holder for cards. Plastic holder for cards. Attach to lanyard or clip.

ACT Clip

For use with cardholder to secure card to clothing.

ACTProx Fob

ACT proximity key fob, 125kHz

ACT Yo Yo

Elaasticated holder for cards and fobs.

iKall

A new entrance panel design featuring versatile technology. With their clean, attractive lines, the modular elements guarantee optimal results by offering

Powercom

Powercom is the original and unmistakeable entrance panel created by Comelit which changes the face of design and the way of working in the sector.

Roma

Classic elegance and stylistic values of tradition meet up with the most modern functions.

Bespoke

All Comelit bespoke panels are made from the highest grade S/S. The plates are 2.5mm thick, the steel is 316 Marine Grade and comes with brushed finish

Bravo

Bravo is the video entry phone with a simple and elegant design, adaptable to all types of homes.

Genius

White glazed ABS body with the possibility of choosing a 4' black and white (flat) or colour (LCD) monitor.

Maestro

Designer style with compact technology. Comelit's innovative Maestro video monitor is the perfect marriage of style and functionality.

Diva Video

Elegant. Technological. Precious. Comelit reinvents the internal unit and designs it as exclusive in its shape and functions.

Easycom

Simple, functional, technological. The Easycom wall-mounted door-entry phone from Comelit is a highly-evolved product, as it occupies a minimal amount of space

Diva Audio

Elegant. Technological. Precious. Comelit reinvents the internal unit and designs it as exclusive in its shape and functions.

Style

Its aesthetic line and the possibility of personalising the cover make the Style telephone unique and adaptable to any surroundings.

Entrée Phone 603

Wireless intercom system for gates or door Expected working range of 150m or 250m with line of sight (i.e. handset used near a window) Modern stylish

Cell Com 3E

GSM intercom using mobile cell phone networks, 850/900/1800/1900 MHz bands. No range limit. Rings up to 3 telephone numbers (land line and/or mobiles) in

Cell Com 800

GSM intercom using mobile cell phone network, 850/900/1800/1900 MHz bands. Up to 4 buttons using Style 5 panel, or 8 buttons on Powercom panel. No range

Entrée Phone 605

Digital Video intercom system Class leading range of up to 300 meters line of sight, or 200 m through 1 external masonry wall. Heavy gauge 2mm brushed

Entrée Phone 606

WiFi wireless intercom Up to 200m range with directional patch antenna Connects wirelessly to home hub or router Makes a PUSH video call to most connected

ACTentry A10 Entry Panel

Brushed stainless steel Door Entry Panel incorporates Call Button and Speech Unit (microphone & speaker) Accepts 10 PIN codes Incorrect Code Lockout

ACTentry A10 Door Intercom Handset

White high impact ABS plastic. Internal use only. A ‘lock release’ push-button prevents inadvertent use. The electric ringing tone is reduced when the

GSM Intercom CellCom Plus

GSM Audio intercom system GSM intercom for unlimited range access control. Optional mobile application 100% Marin grade BS316 stainless steel 2 year

AES GSM - Gate Opener

This GSM device can be used for controlling access of gates, doors or barriers. The unit can store up to 20 numbers and any of these numbers can call the unit

ACTpro 200(Door Station - 2 doors with PSU)

ACTpro-200-Door-Station-2-doors-with-PSU.jpg

Title